Building Material Plaster Board PVC Film Lamination Gypsum Ceiling Board

• Customization: Available
• Style: Modern
• Shape: Square
• Model NO.: JTL-046
• Thickness: 7mm
• Width: 60cm
• Surface Treatment: Film Coating
• Function: Fireproof Board Ceiling, Soundproof Ceiling, Normal Ceiling, Integrated Ceiling, Heat Insulation Ceiling, Moisture-Proof Ceiling, Mould-Proof Ceiling, Smoke-Proof Ceiling, Waterproof Ceiling
• Feature: Artistic Ceilings, Integrated Ceilings, Perforated Ceilings
• Color: White
• Certification: RoHS, ISO9001:2000, ISO9001:2008
• Application: Office, Hotel, Household, Dust Free Room, Public
• Type: Decorative Plasterboards
• Certificate: CE, ISO, Carb, BS
• Pattern: 238 975 for More
• Name 3: PVC Gypsum Ceiling Board
• Name 4: PVC Gypsum Board
• Name 5: Gypsum Board
• Name 6: Gypsum Ceiling Tile
• Name 7: PVC Gypsum Ceiling
• Name 8: Gypsum Ceiling Board
• Name 9: PVC Coated Gypsum Ceiling Tile
• Name 10: PVC Laminated Gypsum Ceiling
• Name 11: False PVC Gypsum Board
• Name 12: PVC Vinyl Gypsum Ceiling
• Name 13: Plasterboard Ceiling
• Name 14: PVC Plasterboard
• Transport Package: Carton
• Specification: 595/603mm*595/603mm*7/8/9.5mm or customize
• Trademark: JTL
• Origin: Linyin
• HS Code: 3926400000
• Production Capacity: 100000000 Square Meter/Square Meters Per Month
• Package Size: 60.00cm * 60.00cm * 10.00cm
• Package Gross Weight: 2.000kg

Product Description

Products Description

Product:	drywall embossed pvc film gypsum board false ceiling
Material:	Pure gypsum powder;Quality wood-pulp paper;Fiber glass;Adhesive,etc
Type:	Standard/Waterproof/Fire resistant
Width:	1200mm 1220mm 595/603mm*595/603mm
Length:	1800mm 2400mm 2440mm 2700mm 3000mm 3600mm
Thickness:	7mm 7.5mm 8mm 9mm 9.5mm 10mm 12mm 12.5mm 13mm
Edge:	Tapered or Square
Usage:	Wall Partition and Suspended Ceiling in home decoration

Features
A.Type:
1. Regular Gypsum Board
2. Fire proof Gypsum Board
3. Water-resistance Gypsum Board
B.Color of the surface protection paper:
white-usually for standard gypsum board
red-usually for fire-resistant gypsum board
green-usually for moisture proof gypsum board

C.Features:
1) Non-absorbent, fire retardant and self-extinguishing
2) Weather proof, vandal proof, can be shaped, molded, painted and screen printed
3) Non-corrosive, non-toxic and chemical resistant
4) Tough, rigid with high impact strength
5) Non-warping and stain ;proof

D.Performance
1 Aging proofing
2. Frost resistance
3 Light weight
4 Environment friendly
E.Application
Hotel, Restaurant, Office, Station, Shopping Hall and private home of Ceiling, Partition and Dry lining wall

 Feature:
1) Surface: Imported or domestic PVC Film. / Painting 
2) Back: Aluminium foil /Non-woven fabric
3)Edge: square and Fell level
4).Environment protection product: Adopting natural gypsum material free of any harmful material.
5).Non-flammable B1, in accordance with Chinese standard GB8624-1997
6).Not deforming, not cracking: keeping integrity and sound insulation for long under normal changes of.
7).Light weight, convenient to transport.,Corrosion-resistant, Non-dust, Easy clean 

Step 1: Construct a pair of T-braces from 2 X 4s about an inch longer than the distance from floor to ceiling. Nail 2 X 4s about 3 feet long to one end of each longer 2 X 4 to form the Ts. Alternately, adjustable T-braces can be rented.

 Step 2: Cut drywall panels to size. Use a sharp utility knife along a straightedge to cut drywall. After you make the cut through the face paper, place the board over a length of 2 X 4 laid flat on the floor, or some other type of support, and snap the scored section down. The gypsum core will break along the line you cut. Then turn the panel over, cut the paper on the other side, and smooth the rough edges with very coarse sandpaper on a sanding block.

 Step 3: Install drywall panels on the ceiling. If possible, try to span the entire width with a single sheet of wallboard to reduce the number of joints. Position and wedge the T-braces against the drywall sheet to hold it in place until you finish nailing it.

 Step 4: Drive nails at 6-inch intervals into all the joists covered by the sheet. Start in the center of the drywall panel and work out. Give each nail an extra hammer blow to dimple the surface slightly without breaking the face paper.

 Step 5: When the ceiling is finished, cut and install wall panels. Carefully measure for any cutouts in the drywall, including electrical outlets, switches, or light fixtures. To make cutouts, draw a pattern of the cutout on the wallboard, drill a hole on the pattern line, and then use a keyhole saw to follow the pattern.

 Step 6: Space the nails 6 inches apart along studs, but start nailing 4 inches from the ceiling. Butt the wall panels against the ceiling sheets. Dimple all nails. Nail metal outside cornerbeads to cover any outside corners.

Popular Color design
We have more than 100 designs, including white and colorful, if you want to know other designs, feel free to contact us any time!

FAQ:

1) Q: What is the minimum order?
A: One 20' container for every size, but if you need two or three standard design for one container, we will try to meet you.
2) Q:What payment methods your company accept?
A:We accept most of the payment methods, but mainly accept T/T, L/C, Western Union, Paypal and MoneyGram.
3) Q:I haven't done business with you guys before, how can i trust your company?
A: We've been golden suppliers in Alibaba for 5 years, which concentrate on professional ceiling and drywall in 10 years, what's more, we've got quite a lot authority certificates, for example, CE, ISO9001, SGS, Alibaba onsite check certificate. I hope those above will be persuasive enough.Our Trade Assurance Limit is US $30,000, and it is still going up.
4) Q:what's the delivery time of your company?
A:Well, they depends on the quantity of your order. Normally it need 7-15 working days after receiving your advance payment, for special time, delivery time will be longer.
5) Q:Do you give any discount ?
A:I'll surely try my best to help you get those by the best price and good service at the same time.